Specna Arms SA-F08 FLEX™ Gen.2 HAL1™ Easy Entry Box Kit with charger and battery pack
An ideal choice for those embarking on an airsoft adventure. The kit includes an airsoft carbine and the basic accessories needed to get started - a rechargeable battery and charger. It's a complete package that makes the replica ready for any games right out of the box.
The kit includes:
- Specna Arms SA-F08 FLEX™ Gen.2 HAL1™ airsoft carbine
- Charger from the manufacturer Specna Arms for Li-Po batteries
- Li-Po 11.1V battery pack from manufacturer Specna Arms with 1000mAh capacity with Deans plug.
Specna Arms SA-F08 FLEX™ Gen. 2HAL1™airsoft CarbineBlack
The SpecnaArms Flex Gen.2 series of carbines was created to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned to achieve even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2series has been equipped with, among other things:
- TDC Magnus™ Rotary Hop-Up Chamber (Top Down Center) allowing for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser, which will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Ather™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
Features of the HAL™ system:
- trigger detection based on magnetic sensors and Hall effect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100%)
- adjustable pre-cocking (6 levels)
- AUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- SEMI programmable fire modes (semi, binary, AUG, sniper)
- easy programming via trigger
- low battery alarm
- compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The replica is made mainly of nylon fibre-reinforced polymer and metal parts. The polymer used is characterised by high strength, rough texture and matt colour.
The most critical parts are made of metal , including: flame suppressor, external barrel, dummy slide, shell ejector flap, fire mode switch, breech release button, magazine clip, QD mounts on the butt, pins and reloading lever.
Thereplica is fitted with a front-mounted RRA Lightweight Free Float Rail in M-LOK standard licensed by Rock River Arms®, and the barrel terminates in a standard discharge device mounted on a 14mm CCW thread. On the back of the replica, folding sighting instruments have been placed.
In addition to the mentioned internal parts ( TDC Magnus™ chamber, Ather™ gearbox shell, Helium™ flat rubber, sealed aluminium nozzle), inside the replica we can find, among others:
- 8mm slide bearings
- steel gears
- polycarbonate polymer piston with full steel slats
- a high quality 6.03mm precision barrel
The replica uses a quick-change spring system, ESA™. This allows the power of the replica to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
Features of the replica:
- lightweight and compact design.
- hAL™ layout.
- m-LOK standard front end with RIS rails
-eSA™ quick-change spring system
-Folding sighting instruments.
Charger and battery data:
The battery in the kit is a Li-Po 11.1 V pack with a capacity of 1000 mAh with a Deans plug. Its discharge current is 20/40 C.
Battery pack dimensions:
91x17.4x16.7mm
The charger features a charging function for 2-cell (7.4V) and 3-cell (11.1V) batteries with a balanced charge function.
Charger data:
- Input 110-240 V AC
- Output 800 mA
Package include:
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
Upload a file with your order
The following extensions are supported: png, jpeg, jpg, gif, txt, csv, pdf, doc, docx, rtf, xls, xlsx, ppt, pptx, odt, ods, eps.
Upload file
